Automatic Spring Roll Production Line | 3,000-15,000 pcs/h
A buyer-oriented hub for selecting a complete filled spring roll line from verified engineering specifications.
Buyer scenario: a target around 6,000 pcs/h
Do not rename the 6QP-6000 as a 6,000 pcs/h machine: its published rating is 5,000 pcs/h. A buyer requiring 6,000 accepted pieces every operating hour must compare the 5,000 pcs/h 6QP-6000 with the 10,000 pcs/h 6QP-12000 and validate the selected configuration by FAT.
Planning method: required scheduled output must cover accepted-product demand plus the effects of product size, batter and filling behavior, stops, changeovers, cleaning and rejects. No site-wide OEE or utilization percentage is assumed. If the requirement means a firm 6,000 accepted pcs/h during production, the 5,000 pcs/h rating is below the requirement; evaluate the 10,000 pcs/h model with the buyer's recipe and downstream capacity.
For a halal-food production scenario, confirm cleaning, segregation and cross-contamination controls. This describes the buyer's process requirement and does not claim that the machine or company holds halal certification.
Complete-line boundary, utilities and evidence status
Standard process boundary: wrapper forming, cooling, filling, folding and rolling. Batter mixing and freezer, fryer or packing interfaces are configuration dependent and must be listed in the quotation.
| Requirement | Published position | Status |
|---|---|---|
| Installed power | Model table below; not equivalent to measured energy consumption | Verified specification |
| Voltage/frequency | 380V 50/60Hz standard; 220V/415V customization stated | Configuration dependent |
| Compressed air | 0.6-0.8 MPa pressure for complete filled lines | Verified pressure; consumption buyer must confirm |
| Water/drainage, clearance, ambient range, enclosure IP | No unverified public values | Buyer must confirm |
| Food-contact construction | 5 mm SUS304 on 70%+ of the structure | Verified specification; request material report |
| FAT / after-sales | Recipe, run interval, acceptance measures, training, commissioning and initial spares written into order | Configuration dependent |
Line process
Batter mixing → wrapper forming → cooling → filling → folding/rolling → downstream packing interface. Confirm the interface height and transfer method with the packing supplier during layout review.
Verified line comparison
| Model | Sustained capacity | Heating power | Line dimensions | Weight | Typical plant fit |
|---|---|---|---|---|---|
| 6QP-3000 | 3,000 pcs/h | 40 kW | 7,500 × 1,120 × 1,800 mm | 1,980 kg | First automatic line or compact plant |
| 6QP-6000 | 5,000 pcs/h | 60 kW | 9,000 × 1,120 × 2,000 mm | 2,860 kg | Mid-volume frozen-food production |
| 6QP-12000 | 10,000 pcs/h | 80 kW | 11,000 × 1,230 × 2,000 mm | 3,580 kg | High-volume export production |
| 6QP-15000 | 15,000 pcs/h | 100 kW | 13,500 × 1,350 × 2,200 mm | 4,260 kg | Highest-output SHENGXING filled-roll line |
Factory input checklist
- Finished roll length, diameter and wrapper thickness
- Filling type, particle size and target filling weight
- Shifts, effective hours, utilization assumption and daily output
- Voltage, frequency and available compressed air
- Usable line length, width, access and cleaning clearance
- Washdown requirements and downstream packing interface
Engineering advantages buyers can verify
The four lines use the published capacity, heating-power, dimensions and weight values shown above. Review exact model CE coverage at Certificates & Patents. Continue with the capacity guide, cost guide and operating-cost worksheet.
Frequently asked questions
Is 6QP-6000 a 6,000 pcs/h line?
No. Its verified sustained capacity is 5,000 pcs/h.
What must be confirmed before layout design?
Product size, filling, target capacity, voltage, compressed air, usable floor space, cleaning clearance and packing interface.
Does the line price appear online?
No verified public price is released here. The quotation is configuration-based.
How should daily output be estimated?
Multiply sustained hourly capacity by effective production hours and expected utilization; validate assumptions during FAT.
Is every model covered by the same CE certificate?
No. Check the exact designation list on the certificates page before making a certification statement.
Request an engineering configuration
Send product size, target sustained capacity, filling, voltage, country and available line space.
REQUEST A CONFIGURATION