SHENGXING injera machines 6QP-8045 (450 mm) and 6QP-12060 (600 mm) bake authentic honeycomb teff injera at 3,500-8,000 pcs/h. Both CE certified.
| Parameter | 6QP-8045 | 6QP-12060 |
|---|---|---|
| Production capacity | 3,500 pcs/h | 8,000 pcs/h |
| Maximum heating width | 450 mm | 600 mm |
| Electrothermal power | 38 kW | 59 kW |
| Dimensions (L x W x H) | 5200 x 1000 x 1500 mm | 5600 x 1200 x 2000 mm |
| Machine weight | 1,200 kg | 1,994 kg |
Injera gets its open, spongy surface — the "eyes" — from fermented teff batter. The batter is acidic and actively ferments while it sits in the tank, which is what destroys ordinary sensor and control electronics. On a SHENGXING injera machine the batter is metered onto a wide alloy-cast drum held at a PLC-regulated surface temperature, steam is trapped under a cover so the top face sets without browning, and the sheet is lifted continuously. Eye formation depends on three things the machine controls: drum surface temperature uniformity within 1 degree C, a drum width large enough to cast a full-size injera without a seam, and control firmware that does not fault when the batter pH drops.
A 450 mm drum (6QP-8045) produces standard household-size injera at 3,500 pcs/h. A 600 mm drum (6QP-12060) is the widest in the SHENGXING wrapper range and produces larger restaurant and export format injera at 8,000 pcs/h. Both are the same machine frame working on a different food, which is why one model designation covers two duties.
Fermented teff batter stalls conventional sensors. The self-developed PLC linkage used on these models is covered by SHENGXING software copyright and is engineered to run 24/7 on acidic batter without fault stops.
Two models: the 6QP-8045 with a 450 mm drum at 3,500 pcs/h, and the 6QP-12060 with a 600 mm drum at 8,000 pcs/h. Both are the same machine frame that also produces spring roll wrapper sheets.
Yes. The 6QP-8045 and 6QP-12060 run both products; only the batter and the cutting setup change. This is why SHENGXING publishes one page per model and describes both duties on it.
Authentic injera is a large round sheet with an open honeycomb structure. A narrow drum cannot cast the full diameter without a seam, so the 450 mm and 600 mm widths are the practical minimum for industrial injera.
The acidic fermented batter is what faults ordinary control electronics. These models run self-developed PLC linkage covered by SHENGXING software copyright, engineered for 24/7 operation on acidic batter.
Yes. Both the 6QP-8045 and the 6QP-12060 model designations appear on CE certificate M.2022.206.C76950, issued by UDEM International Certification, valid to 2027-08-30.
Lead time is 60 days from confirmed order and deposit, MOQ 1 set. Voltage is customised per destination: 220V / 380V / 415V, 50/60Hz.
Lead time 60 days. MOQ 1 set. FOB / CIF / DDU (14 Incoterms supported) Payment: T/T, L/C, D/P D/A, MoneyGram, Credit Card, Western Union, Escrow, normally 50% deposit + 50% before shipment after video inspection. Loading port Tianjin (Qingdao optional). Packing: export-standard fumigation-free wooden crates, shock and moisture protected.
Our engineers will recommend the model, send a configuration proposal and provide a free 2D/3D plant layout drawing against your floor dimensions.
GET A CONFIGURATION PROPOSAL